Skip to main content Skip to search Skip to main navigation

Kölner Permacoll Base P

Product information "Kölner Permacoll Base P"


Adhesive for powder gold, suitable for the interior and exterior field. Permacoll Base P is applied with a soft brush. Depending on the thickness of the coating and environmental conditions, powder gold can be applied to the sticky film after approx. 15-60 minutes. Gilding in the interior can be burnished with agate stones. The workpiece has to be coated with 2 layers of Kölner KGGG Fond, before gilded and burnished.

The surface can be burnished after 24 hours.

Available packaging unit: 100 ml, 500 ml, 1.000 ml


Skip product gallery

Accessory Items

Agate Stone 32
Agate Stone 32
  The agates are semi-precious stones that are formed from silica compounds. They contain variations in the colouring. Homogeneously structured agates are banded with a metal ring/handle and used for burnishing. The agates must be deaden in order to use for burnishing. They are very sensitive to scratching/damage and should be safely stored.   On the left the front-view – on the right the side-view.  

€28.56
Powder Silver
Powder Silver
Packaging unit: 1 g
State-of-the-art technology and the strictest quality standards are reflected in the brilliance, economical consumption, and excellent workability of our powder gold. Powder gold in flake form, particle size < 45 μm. Powder gold flakes and powder silver flakes are applied to the special adhesive base for powder gold, “Kölner Permacoll P,” either using a dry spray applicator (for economical use) or with a brush (for dusting). Weather-resistant gilding offers advantages over traditional leaf gilding, especially in the case of deep undercuts or very small objects. Application: The adhesive base “Kölner Permacoll P” is applied generously with a synthetic hair brush and immediately dusted with powder gold. It is recommended to coat only small areas at a time. After drying, all fine details of the substrate become visible again. Even the finest engravings are preserved. The open time is very short, enabling fast working. After a drying time of 24 hours, the powder gilding can be burnished with an agate polishing stone to smooth the surface and adjust the level of gloss. A matte-to-gloss finish is therefore possible. Gilding with powder gold is significantly more scratch-resistant than leaf gilding and, from 23 karats, weather-resistant. Available in 1 g, 2 g, 5 g, or 10 g packages. Special packaging sizes and custom colors available upon request.  

€10.59
Powder Gold 23,75 Carat Nature
Powder Gold
Carat: 23,75 Karat Rosenoble | Packaging unit: 1 g
State-of-the-art technology and the strictest quality standards are reflected in the brilliance, economical consumption, and excellent workability of our powder gold. Powder gold in flake form, particle size < 45 μm. Powder gold flakes and powder silver flakes are applied to the special adhesive base for powder gold, “Kölner Permacoll P,” either using a dry spray applicator (for economical use) or with a brush (for dusting). Weather-resistant gilding offers advantages over traditional leaf gilding, especially in the case of deep undercuts or very small objects. Application: The adhesive base “Kölner Permacoll P” is applied generously with a synthetic hair brush and immediately dusted with powder gold. It is recommended to coat only small areas at a time. After drying, all fine details of the substrate become visible again. Even the finest engravings are preserved. The open time is very short, enabling fast working. After a drying time of 24 hours, the powder gilding can be burnished with an agate polishing stone to smooth the surface and adjust the level of gloss. A matte-to-gloss finish is therefore possible. Gilding with powder gold is significantly more scratch-resistant than leaf gilding and, from 23 karats, weather-resistant. Available in 1 g, 2 g, 5 g, or 10 g packages. Special packaging sizes and custom colors available upon request.  

Variants from €115.13
€194.14